Preliminary Procedures

1. Remove the rear seat cushion. Refer to Rear Seat Cushion Replacement .
2. Disable the SIR system. Refer to SIR Disabling and Enabling .

1

Screw Cover Plate

2

Rear Quarter Upper Trim Panel Screw

Notice: Refer to Fastener Notice in the Preface section.

Tighten
3 N·m (27 lb in)

3

Rear Quarter Upper Trim Panel

Procedure

1. Remove the seat belt anchor bolt.
2. Disconnect the seat belt through the slot in the escutcheon opening.
3. Release the tether to remove.
4. Securely attach the tether when reinstalling the molding.