Blower Motor Replacement Left Hand Drive

1. Remove the (I/P) - right side insulator panel. Refer to Instrument Panel Insulator Replacement - Right Side.
2. Remove the I/P compartment. Refer to Instrument Panel Compartment Replacement.
3. Loosen the I/P carrier mounting bolts but do not remove, and reposition the carrier to gain clearance for blower motor removal. Refer to Instrument Panel Carrier Replacement.



4. Disconnect the blower motor electrical connector.



5. Remove the screws (1) that retain the blower motor.



6. Remove the blower motor.

1. Install the blower motor.

Notice: Refer to Fastener Notice in the Preface section.




2. Install the blower motor screws (1).

Tighten
Tighten the screws to 1.5 N·m (13 lb in).




3. Connect the blower motor electrical connector.
4. Install the I/P compartment. Refer to Instrument Panel Compartment Replacement.
5. Install the I/P insulator - right side. Refer to Instrument Panel Insulator Replacement - Right Side.
6. Install the I/P carrier mounting bolts. Refer to Instrument Panel Carrier Replacement.

Tighten
Tighten the screws to 25 N·m (19 lb ft).