Preliminary Procedure

1. Remove the right side instrument panel (I/P) insulator. Refer to Instrument Panel Insulator Replacement - Right Side.
2. Remove the blower motor control module. Refer to Blower Motor Control Module Replacement.
3. Disconnect all the electrical connectors from components associated with the right air temperature actuator.

1

Right Air Temperature Actuator Screw (Qty: 2)

Notice: Refer to Fastener Notice in the Preface section.

Tighten
2 N·m (18 lb in)

2

Right Air Temperature Actuator

3

Right Air Temperature Actuator Lever