Pedestrian Impact Detection Module Replacement. Cadillac CTS 2008

For 1990-2009 cars only

Makes 🢒 Cadillac 🢒 2008 🢒 CTS 🢒 Power and Signal Distribution 🢒 Data Communications 🢒 Pedestrian Impact Detection Module Replacement

Callout	Component Name
Preliminary Procedure Remove the instrument panel (I/P) compartment assembly. Refer to Instrument Panel Compartment Replacement.
1	Pedestrian Impact Detection Module Bolt/Screw (Qty: 3) Notice: Refer to Fastener Notice in the Preface section. Tighten 10 N·m (89 lb in)
2	Pedestrian Impact Detection Module Procedure Disconnect the electrical connectors. Refer to Control Module References for programming and set up procedures.

Callout

Component Name

Remove the instrument panel (I/P) compartment assembly. Refer to Instrument Panel Compartment Replacement.

Pedestrian Impact Detection Module Bolt/Screw (Qty: 3)

Notice: Refer to Fastener Notice in the Preface section.

Tighten
10 N·m (89 lb in)

Pedestrian Impact Detection Module