Preliminary Procedures

1. Remove the interior trim panel. Refer to Rear Side Door Trim Panel Replacement.
2. Remove the rear door outer belt sealing strip. Refer to Rear Side Door Window Outer Sealing Strip Replacement.
3. Remove the rear door inner belt sealing strip. Refer to Rear Side Door Window Inner Sealing Strip Replacement.
4. Remove the rear door window. Refer to Rear Window Replacement.

1

Stationary Window Bolt Access Plug

Procedure

1. Using mask tape, tape off the outer door frame to prevent scratches.
2. Remove the water deflector.

2

Rear Side Door Stationary Window Bolt

Notice: Refer to Fastener Notice in the Preface section.

Tighten
10 N·m (89 lb in)

3

Rear Door Stationary Window

Tip
Pull the stationary window assembly down to release it from the door frame.