- Raise and support the vehicle. Refer to
Lifting and Jacking the Vehicle .
- Clean any dirt from around the fill plug (1).
- Remove the transmission fill plug (1) and washer (2) from the transmission.
- Check that the transmission fluid level is even with the bottom of the fill plug hole.
- Add transmission fluid, if necessary.
- Inspect the fill plug washer (2) and replace if necessary.
Notice: Refer to Component Fastener Tightening Notice in the Preface section.
- Install the transmission fill plug (1) and washer (2).
Tighten
Tighten the transmission fill plug to 37 N·m (27 lb ft).
- Lower the vehicle.