Preliminary Procedures

1. Remove the door trim panel. Refer to Front Side Door Trim Panel Replacement .
2. Remove the front door upper trim. Refer to Front Side Door Garnish Molding Replacement .

1

Outside Rearview Power Mirror Harness Retainer

2

Outside Rearview Power Mirror Nuts (Qty: 3)

Notice: Refer to Fastener Notice in the Preface section.

Procedure

1. Lower the window to the full down position.
2. Disconnect the power mirror wire harness electrical connector.

Tighten
9 N·m (80 lb in)

3

Outside Rearview Power Mirror

Tip
Pull the wiring harness through the hole in the mirror patch.