1

Rear Side Door Window Belt Outer Sealing Strip Screw (Qty: 2)

Notice: Refer to Fastener Notice in the Preface section.

Tighten
1.5 N·m (13 lb in)

Procedure

1. Lower the window to the full down position.
2. Lift upward at the rear of the molding to release it from the pinch-weld.

2

Rear Side Door Window Belt Outer Sealing Strip

Procedure

1. Align the sealing strip to the door.
2. Ensure that the end cap is flush to the door cutline.
3. Rotate the sealing strip downward.
4. Align the sealing strip clips to the slots in the door pinch-weld flange.
5. Push the sealing strip downward to fully seat and secure the strip to the door.