GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Remove the I/P Compartment. Refer to Instrument Panel Compartment Replacement.
  2. Remove the blower motor control module. Refer to Blower Motor Control Module Replacement.

  3. Object Number: 756241  Size: SH
  4. Remove the right air temperature actuator screws (1).

  5. Object Number: 756124  Size: SH
  6. Remove the right air temperature actuator.
  7. Disconnect the right air temperature actuator electrical connector.

Installation Procedure

  1. Connect the right air temperature actuator electrical connector.

  2. Object Number: 756124  Size: SH
  3. Install the right air temperature actuator.
  4. Notice: Refer to Fastener Notice in the Preface section.

  5. Install the right air temperature actuator screws (1).
  6. Tighten
    Tighten the screws to 1 N·m (9 lb in).


    Object Number: 756241  Size: SH
  7. Install the blower motor control module. Refer to Blower Motor Control Module Replacement.
  8. Install the I/P Compartment. Refer to Instrument Panel Compartment Replacement.