GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2008 🢒 CTS 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Parking Brake Indicator Switch Replacement

Removal Procedure

    Object Number: 1970049 Size: SH
  1. Remove the left instrument panel insulator panel. Refer to Instrument Panel Insulator Replacement - Left Side .
  2. Disconnect the parking brake indicator switch electrical connector.
  3. Remove the parking brake indicator switch bolt (1).
  4. Remove the parking brake indicator switch (2).

Installation Procedure

    Object Number: 1970049 Size: SH
  1. Assemble the parking brake indicator switch bolt (1) to the parking brake indicator switch (2).
  2. Install the parking brake indicator switch assembly to the parking brake lever.

    3. Align the pin on the indicator switch to the locator hole on the parking brake lever.

    Notice: Refer to Fastener Notice in the Preface section.

  3. Tighten the parking brake indicator switch bolt.

    4. Tighten
    Tighten the bolt to 7 N·m (62 lb in).

  4. Connect the parking brake indicator switch electrical connector.
  5. Install the left instrument panel insulator panel. Refer to Instrument Panel Insulator Replacement - Left Side .