Preliminary Procedures

1. Remove either the LF or RF wheelhouse extension. Refer to Wheelhouse Extension Replacement .
2. Disconnect the fog lamp bulb socket electrical connector.

1

Front Fog Lamp Adjuster Screw

Procedure

1. Remove the adjuster screw from the fog lamp bracket and lamp assembly.
2. Count the number of turns when removing the adjuster screw for a reference upon installation.
3. Aim the fog lamps after installation. Refer to Fog Lamp Aiming .

2

Front Fog Lamp Screw (Qty: 2)

Notice: Refer to Fastener Notice in the Preface section.

Tighten
2 N·m (18 lb in)

3

Front Fog Lamp Assembly

Tip
Remove the lamp assembly from the fog lamp bracket.

4

Front Fog Lamp Bulb Socket

Caution: Refer to Halogen Bulb Caution in the Preface section.

Tip
Turn the bulb socket counterclockwise and remove from the lamp assembly.