Preliminary Procedure

1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle .
2. Remove the front air deflector. Refer to Front Air Deflector Replacement .

1

Clamp

2

Power Steering Reservoir Inlet Pipe/Hose

3

Clamp

4

Power Steering Gear Outlet Pipe/Hose

5

Nut, Power Steering Fluid Cooler (Qty: 2)

Notice: Refer to Fastener Notice in the Preface section.

Tighten
25 N·m (18 lb ft)

6

Power Steering Fluid Cooler

Tip
After installation fill and bleed the power steering system. Refer to Power Steering System Bleeding .