GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 787980  Size: SH

    Important: There is a binding effect on the power window motor drive when the window is in the fully closed or open position.

  1. Partially open the window, if possible.
  2. Remove the door trim panel. Refer to Front Side Door Trim Panel Replacement .
  3. Remove the water deflector. Refer to Front Side Door Water Deflector Replacement .
  4. Remove the screws (1) securing the power window motor to the window regulator.
  5. Remove the power window motor.

Installation Procedure


    Object Number: 787980  Size: SH
  1. Install the power window motor to the window regulator.
  2. Notice: Refer to Fastener Notice in the Preface section.

  3. Install the power window motor to regulator screws (1).
  4. Tighten
    Tighten the window motor screws to 4 N·m (62 lb in).

  5. Install the water deflector. Refer to Front Side Door Water Deflector Replacement .
  6. Install the door trim panel. Refer to Front Side Door Trim Panel Replacement .