Tools Required

1. Remove the wiper arms (1, 4). Refer to Windshield Wiper Arm Replacement .
2. Remove the air inlet grille panel. Refer to Air Inlet Grille Panel Replacement .



3. Pull or push on the wiper transmission linkage to rotate the wiper motor crank arm (2) from the park position (1) to the area opposite the park position (3).



4. Disconnect the wiper motor harness connector (4).
5. Remove the 2 screws (3, 5) retaining the wiper system drive module.
6. Remove the wiper system drive module (1) from the vehicle.



7. Remove the drive links from the wiper motor crank arm and the wiper transmission drive shafts with the J 39232 .
8. Remove the transmission links from the wiper motor.

1. Position the transmission drive links (4) to the pivot arms (3, 5).



2. Install the drive links onto the wiper motor crank arm and the wiper transmission drive shafts with the J 39529 .
3. Install the wiper motor motor. Refer to Windshield Wiper Motor Replacement .



4. Install the air inlet grille panel. Refer to Air Inlet Grille Panel Replacement .
5. Install the wiper arms (1, 4). Refer to Windshield Wiper Arm Replacement .
6. Operate the wipers and check for proper operation.