GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2007 🢒 CTS 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Electronic Navigation Antenna Replacement

Removal Procedure
  1. Remove the I/P retainer. Refer to Instrument Panel Retainer Replacement.

    2. Object Number: 791396 Size: SH
  2. Remove the screws (1) securing the global position antenna to the I/P carrier.

    3. Important: Do not splice the wiring or make the antenna lead shorter.

  3. Remove the wiring from the carrier.

Installation Procedure

    Object Number: 791396 Size: SH
  1. Route the antenna wire to the carrier.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the antenna to the carrier.

    3. Tighten
    Tighten the screws (1) to 2 N·m (18 lb in).

  3. Install the I/P retainer. Refer to Instrument Panel Retainer Replacement.