GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2006 🢒 CTS 🢒 Suspension 🢒 Rear Suspension 🢒 Stabilizer Shaft Insulator Replacement

Removal Procedure
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .

    2. Object Number: 802054 Size: SH
  2. Remove the stabilizer shaft mounting bolts.
  3. Remove the stabilizer shaft bracket.
  4. Remove the stabilizer shaft insulator from the stabilizer shaft.

Installation Procedure

    Object Number: 802054 Size: SH
  1. Install the stabilizer shaft insulator to the stabilizer shaft with the slit facing rearward.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the stabilizer shaft bracket.
  3. Install the stabilizer shaft bracket mounting bolts.

    4. Tighten
    Tighten the bolts to 60 N·m (44 lb ft).

  4. Lower the vehicle.