BODY COMPUTER LOCATION CHASSIS MANUAL REVISION

MODELS AFFECTED: 1987 RIVIERA

Recent inquiries have been received concerning the Body Computer Module (BCM) location in the 1987 Riviera. The Chassis Service Manual incorrectly states the BCM as being located in the console. Correct location of the BCM is behind the right hand instrument panel. To access the BCM for removal and installation, the instrument panel glove box compartment must first be removed.

Please note this change in the Buick Chassis Service Manual, Volume 2, Section 8A Riviera, Pages 50-2 and 201-9, Figure A.

General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.