Step | Action | Yes | No |
|---|---|---|---|
Schematic Reference: Theft Deterrent System Schematics Connector End View Reference: Theft Deterrent System Connector End Views DEFINITION: The Content Theft Deterrent (CTD) System does not disarm when the vehicle is unlocked with the key. | |||
1 | Did you perform the Diagnostic System Check - Vehicle? | Go to Step 2 | |
2 |
Does the test lamp illuminate? | Go to Step 3 | Go to Step 4 |
3 |
Does the test lamp illuminate? | Go to Step 7 | Go to Step 5 |
4 | Test the control circuit of the door key cylinder switch input for a short to voltage or an open. Refer to Circuit Testing and Wiring Repairs. Did you find and correct the condition? | Go to Step 9 | Go to Step 6 |
5 | Test the ground circuit of the door key cylinder switch for an open. Refer to Circuit Testing and Wiring Repairs. Did you find and correct the condition? | Go to Step 10 | Go to Step 7 |
6 | Inspect for a poor connection at the harness connector of the body control module (BCM). Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs. Did you find and correct the condition? | Go to Step 10 | Go to Step 9 |
7 | Inspect for a poor connection at the harness connector of the suspect door key cylinder switch. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs. Did you find and correct the condition? | Go to Step 10 | Go to Step 8 |
8 | Replace the suspect door key cylinder switch. Refer to Door Lock Cylinder Replacement. Did you complete the repair? | Go to Step 10 | -- |
9 | Replace the BCM. Refer to Control Module References for replacement, setup, and programming. Did you complete the replacement? | Go to Step 10 | -- |
10 |
Did you correct the condition? | System OK | |
