For 1990-2009 cars only
Removal Procedure
- Remove the trim panel. Refer to Rear Side Door Trim Panel Replacement .
- Remove the water deflector. Refer to Rear Side Door Water Deflector Replacement .
- Remove the inside handle rods from the rear door inside handle. Refer to Rear Side Door Inside Handle Replacement .
- Disconnect the clip securing the outside handle rod to the rear door lock.
- Remove the screws from the rear door lock.
- Disconnect the electrical connectors from the lock.
- Remove the lock from the rear door with the inside handle rods attached to the lock through the access hole in the inner panel.
- Remove the inside handle rods from the lock.
Installation Procedure
- Install the inside handle rods to the lock.
- Install the lock in position through the access hole in the rear door inner panel.
- Connect the electrical connectors to the rear door lock.
- Install the lock screws to the rear door lock.
- Connect the clip securing the outside handle rod to the rear door lock.
- Install the handle rods to the inside door handle. Refer to Rear Side Door Inside Handle Replacement .
- Install the water deflector. Refer to Rear Side Door Water Deflector Replacement .
- Install the trim panel. Refer to Rear Side Door Trim Panel Replacement .
- Inspect the door lock system for the proper operation.
Notice: Refer to Fastener Notice in the Preface section.
Tighten
Tighten the lock screws to 10 N·m (89 lb in).
