For 1990-2009 cars only
Removal Procedure
- Remove the throttle body air inlet duct. Refer to Air Cleaner Outlet Duct Replacement .
- Use a hammer and a chisel in order to raise the transaxle vent seat off of the transaxle (37).
- Use a flat-bladed tool in order to pry the transaxle vent out of the transaxle (37).
Installation Procedure
- Use a small hammer and a flat-bladed tool and tap down on the transaxle vent seat in order to install the transaxle vent (37).
- Install the throttle body air inlet duct. Refer to Air Cleaner Outlet Duct Replacement .
