- Inspect the reverse band servo components for the following
conditions:
| • | Damaged, worn or porous servo piston (44) |
| • | Damaged servo piston oil seal ring (43) |
| • | Damaged, worn or porous servo cover (40) |
| • | Damaged servo cover O-ring seal (41) |
| • | Damaged servo cover retaining ring (39) |
| • | Broken or collapsed servo piston return spring (49) |
| • | Broken or collapsed servo piston cushion springs (45, 47) |
| • | Damaged or worn servo piston apply pin (48) |
- Assemble the servo piston (44), the servo piston
cushion springs (45, 47), the servo piston cushion spring retainer (46)
and the servo piston apply pin (48).
- Install the servo pin retaining ring (42) onto the servo piston
apply pin (48).
- Install the servo piston oil seal ring (43) onto the servo piston (44).
- Assemble the servo piston return spring (49) onto the servo assembly.
- Position the transmission so that the oil pan is facing
down.
- Install the servo cover O-ring seal (41) onto the servo cover (40).
- Install the servo and cover assembly (40-49) into the case.
- Use a long screwdriver in order to depress the reverse
band servo cover (40) by prying against the transmission holding fixture.
- Hold the reverse band servo assembly compressed.
- Use a small screwdriver in order to install the reverse band servo cover
retaining ring (39).
- Remove the long screwdriver.
