Step | Action | Yes | No |
|---|---|---|---|
Schematic Reference: Outside Rearview Mirror Schematics Connector End View Reference: Vehicle Access Connector End Views or Power Seat Connector End Views | |||
1 | Did you perform the Diagnostic System Check - Vehicle? | Go to Step 2 | |
2 | Verify that the power mirrors mirror tilt in reverse fault is present. Does the mirror tilt in reverse operate normally? | Go to Testing for Intermittent Conditions and Poor Connections | Go to Step 3 |
3 | Verify that the tilt mirror option is ON. Refer to Driver Personalization . Is the tilt mirror option ON? | Go to Step 4 | Go to Driver Personalization |
4 | Do the power mirrors operate properly? | Go to Step 5 | |
5 | Inspect for poor connections at the harness connector of the memory seat module (MSM). Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs . Did you find and correct the condition? | Go to Step 7 | Go to Step 6 |
6 | Replace the MSM. Refer to Control Module References for replacement, setup, and programming. Did you complete the replacement? | Go to Step 7 | -- |
7 | Operate the system in order to verify the repair. Did you correct the condition? | System OK | Go to Step 2 |
