Step | Action | Yes | No |
|---|---|---|---|
Schematic Reference: Outside Rearview Mirror Schematics Connector End View Reference: Vehicle Access Connector End Views | |||
1 | Did you review the Outside Mirror Description and Operation? | Go to Step 2 | |
2 | Verify that the heated mirrors inoperative fault is present. Do the heated mirrors operate properly? | Go to Testing for Intermittent Conditions and Poor Connections | Go to Step 3 |
3 | Does the rear window defogger operate properly? | Go to Step 4 | Go to Diagnostic Starting Point - Fixed and Moveable Windows |
4 | Test the heated mirror/rear defog relay coil supply voltage circuit of the appropriate outside rearview mirror harness connector for a short to ground or an open. Refer to Circuit Testing and Wiring Repairs . Did you find and correct the condition? | Go to Step 8 | Go to Step 5 |
5 | Test the ground circuit of the appropriate outside rearview mirror harness connector for an open. Refer to Circuit Testing and Wiring Repairs . Did you find and correct the condition? | Go to Step 8 | Go to Step 6 |
6 | Inspect for poor connections at the harness connector of the appropriate outside rearview mirror. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs . Did you find and correct the condition? | Go to Step 8 | Go to Step 7 |
7 | Replace the appropriate outside rearview mirror face. Refer to Outside Rearview Mirror Glass Replacement . Did you complete the replacement? | Go to Step 8 | -- |
8 | Operate the system in order to verify the repair. Did you correct the condition? | System OK | Go to Step 2 |
