GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Buick 🢒 2007 🢒 Rendezvous - FWD 🢒 Suspension 🢒 Rear Suspension 🢒 Rear Wheel Bearing and Hub Replacement

Removal Procedure
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the tire and wheel. Refer to Tire and Wheel Removal and Installation .
  3. Disconnect the sensor lead.

    4. Object Number: 809968 Size: SH
  4. Remove the wheel bearing/hub assembly knuckle bolts (1).

    5. Object Number: 809973 Size: SH
  5. Remove the wheel bearing/hub assembly (1) from the knuckle (2).

Installation Procedure

    Object Number: 809973 Size: SH
  1. Install the wheel bearing/hub assembly (1) on to the knuckle (2).

    2. Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 809968 Size: SH
  2. Install the bolts (1) into the wheel bearing/hub assembly.

    3. Tighten
    Tighten the wheel bearing/hub bolts to 130 N·m (96 lb ft).

  3. Connect the sensor lead.
  4. Install the tire and wheel. Refer to Tire and Wheel Removal and Installation .
  5. Lower the vehicle.