GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Buick 🢒 1997 🢒 Regal 🢒 Engine 🢒 Engine Controls - 3.1L 🢒 Engine Oil Pressure Sensor

Removal Procedure

    Object Number: 82225 Size: SH
  1. Disconnect the negative battery cable.
  2. Raise the vehicle.
  3. Disconnect the electrical connector from the engine oil pressure sensor.
  4. Remove the engine oil pressure sensor.

Installation Procedure

    Object Number: 82225 Size: SH
  1. Install the engine oil pressure sensor.

    2. Tighten
    The oil pressure sensor to 16 N·m.

  2. Connect the electrical connector to the engine oil pressure sensor.
  3. Lower the vehicle.
  4. Reconnect the negative battery cable.