| Table 1: | Engine Control Module (3.6L) |
| Table 2: | Powertrain Control Module (3.8L) |
The scan tool data lists contain all of the cruise control related parameters that are available on the scan tool. The parameters in the list are arranged in alphabetical order. The data list column indicates the location of the parameter within the scan tool menu selections.
Use the scan tool data lists as directed by a diagnostic table or in order to supplement the diagnostic procedures. Begin all of the diagnostic procedures with Diagnostic System Check - Vehicle .
Use the scan tool data lists only after the following is determined:
| • | There is no published DTC procedure nor published symptom procedure for the customer concern. |
| • | The DTC or symptom procedure indicated by the diagnostic system check does not resolve the customer concern. |
The typical data values are obtained from a properly operating vehicle under the conditions specified in the first row of the scan tool data list table. Comparison of the parameter values from the suspect vehicle with the typical data values may reveal the source of the customer concern.
Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
|---|---|---|---|
Operating Conditions: The ignition ON/The engine is ON/The transmission is in Park or Neutral/The cruise control On/Off switch is OFF | |||
Cruise Control Active | Cruise/Traction Data | No/Yes | No |
Cruise Disengage 1-8 History | Cruise/Traction Data | The last reason for cruise control disengagement | Varies |
Cruise Inhibited | Cruise/Traction Data | Reason why the Cruise Control System is inhibited | Varies |
Cruise On/Off Switch | Cruise/Traction Data | On/Off | Off |
Cruise Resume/Accel Switch | Cruise/Traction Data | Active/Inactive/Invalid | Inactive |
Cruise Set/Coast Switch | Cruise/Traction Data | Active/Inactive/Invalid | Inactive |
Engine Speed | Cruise/Traction Data | RPM | Varies |
Ignition 1 Signal | Cruise/Traction Data | Volts | Varies |
Stoplamp Pedal Switch | Cruise/Traction Data | Applied/Released | Released |
Traction Control Status | Cruise/Traction Data | Active/Inactive | Inactive |
Vehicle Speed Sensor | Cruise/Traction Data | km/h (mph) | 0 km/h (0 mph) |
Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
|---|---|---|---|
Operating Conditions: The ignition ON/The engine is ON/The transmission is in Park or Neutral/The cruise control On/Off switch is OFF | |||
Cruise Control Active | Cruise/Traction Data | No/Yes | No |
Cruise On/Off Switch | Cruise/Traction Data | On/Off | Off |
Cruise Resume/Accel. Switch | Cruise/Traction Data | On/Off | Off |
Cruise Set/Coast Switch | Cruise/Traction Data | On/Off | Off |
Engine Speed | Cruise/Traction Data | RPM | Varies |
Ignition 1 Signal | Cruise/Traction Data | Volts | Varies |
Stoplamp Pedal Switch | Cruise/Traction Data | Applied/Released | Released |
Stoplamp Pedal Switch Signal | Cruise/Traction Data | Volts | Varies |
Traction Control Status | Cruise/Traction Data | Active/Inactive | Inactive |
Vehicle Speed Sensor | Cruise/Traction Data | km/h (mph) | 0 km/h (0 mph) |
