Important: Important there is no service interval for in-pipe fuel filter replacement. Only replace the in-pipe fuel filter if it is restricted.

1. Relieve the fuel system pressure. Refer to Fuel Pressure Relief
2. Raise the vehicle.
3. Remove the in-pipe fuel filter bracket attaching screws.
4. Remove the in-pipe fuel filter bracket.
5. Remove the quick-connect fittings at the in-pipe fuel filter. Refer to Servicing Quick Connect Fittings
6. Drain any remaining fuel into an approved gasoline container.

1. Remove the protective caps from the new in-pipe fuel filter.
2. Install the new plastic connector retainer on the in-pipe fuel filter inlet.
3. Install the quick-connect fittings at the inlet of the in-pipe fuel filter. Refer to Servicing Quick Connect Fittings
4. Align the in-pipe fuel filter bracket on the frame with the brake pipe mounting bracket.
5. Install the in-pipe fuel filter bracket attaching screw.

Tighten
Tighten the in-pipe fuel filter bracket attaching screw to 27 N·m (20 lb. ft.).

6. Lower the vehicle.
7. Tighten the fuel tank filler pipe cap.
8. Install the negative battery cable.