REAR LICENSE PLATE LOOSE REPLACE RETAINING SCREWS

MODELS AFFECTED: 1990 CENTURY (BETWEEN VIN 450679 AND 465932)

CONDITION:

REAR LICENSE PLATE RETAINING SCREWS DO NOT PROVIDE ADEQUATE RETENTION OF REAR LICENSE PLATE.

CAUSE:

Rear license plate retaining screws are incorrect for size of holes in fascia.

CORRECTION:

Replace existing license plate retaining screws with new screws, P/N 11508154.

IMPORTANT:

USE P/N 11508154 FOR THIS APPLICATION. COMMON GRADE SCREWS MAY RUST.

Parts are currently available from GMSPO.

WARRANTY INFORMATION:

Labor Operation Number: T1621 Labor Time : 0.2 Hours

General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.