NEW FRONT DRIVE AXLE HUB NUT TORQUE VALUES ARE REVISED

THE DRIVE AXLE INSTALLATION PROCEDURES SHOWN ON PAGES 3C-9 AND 7D-2 OF THE 1982 CITATION-CELEBRITY SHOP MANUAL (ST-365-82) AND PAGES 3C-10 AND 7D-2 OF THE 1982 CAVALIER SHOP MANUAL (ST-366-82) ARE REVISED AS FOLLOWS: THE HUB NUT IS TO BE DISCARDED AFTER REMOVAL AND REPLACED WITH A NEW NUT. ALSO, THE FINAL TORQUE VALUES ARE CHANGED FROM 290 N.M (225 LB. FT.) TO 260 N.M (185 LB. FT.). THE REVISED HUB NUT TORQUE WILL APPLY TO THE CITATION-CELEBRITY SHOP MANUAL ONLY AS THE CAVALIER SHOP MANUAL ALREADY INCLUDES THE PROPER TORQUE FOR THIS APPLICATION.

General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.