This bulletin is a supplement to 5R12 issued in January, 1985 and reflects a labour hour change for repair code 5A and 6A. The change as follows: -
Repair Code Description Time Allowance ----------- ----------- -------------- 5A Inspect Axle Code, Check End 1.0 Play and Button Thickness. Replace One Axle Shaft. (Inc. Install Axle Studs)*
6A Same as 5A. Replace 2 1.0 shafts*
.1 hour for administration is included.
*When replacing an axle shaft, NEW STUDS (hub bolts), part number 9590271 are to be used.
General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.